​Unique cone design

Provides 10mm continuous contact with flashed pipe providing a watertight seal

Clear markings in metric and imperial measures

Size ranges – Numbers 0-9

Available in Black and Grey EPDM, and red silicone

Twenty-year warranty

CSA Approval number 70029509

Product Brochure

100% Waterproof

No Silicone to apply, just screw it down in minutes and no slippery surface or mess

Up to 30% faster UV, ozone and temperature resistant foam

Seals on wet or oily surfaces

Seals completely waterproof with only 40% compression

No worries on polycarbonate

Twenty Year Warrant

Product Brochure

Special Order Item

Sizes:
MINI:  2.75” X 3.15”
#1: 4” X 4.33”
#2: 6” X 6.58”
#3: 10.5” X 11.33”
#4: 15” X 16.5”
#5: 20.51” X 23.19”
#6: 24.96” X 28.03”

0-11 1/2" Pipe Size #501

On roof pitches greater than 20° (steeper than 4 on 12) select the next larger size for increased flange flexibility.

Ethylene propylene diene monomer (epdm) capable of withstanding constant pipe temperatures of minus 50° c (-58° f) to a maximum of 115° c (239° f).

Available in a wide range of sizes and 3 different colors

Black & Grey dektites can be painted with acrylic paint & withstand temps. up to 239 F or 302 F intermittently

Red silicone dektites will withstand temps up to 392 F or 482 F intermittently with a BAL rating of 29

Low profile base with watershed sleeve

Large square base will cover a larger opening

Twenty Year warranty – just fit it and forget it!

CSA Approval number 70029509

Special Order Item

The large base dramatically reduces rainwater back up on very low or very high roof pitches and deep ribbed roofing profiles

Flashes pipe and roof in one go

The large base covers larger holes around pipes

No need to cut around pipes

Twenty-year warranty

Special Order Item

Sizes:
#3: 1/4″ – 5″
#4: 3″ – 6 1/4″
#5:  4 1/4″ – 7 1/2″
#6: 5″ – 9″
#7: 6″ – 11″
#8: 7″ – 13″
#9: 10″ – 19″

Comes in Dark Grey and Red.

Silicone rubber compound (hi-temp) capable of withstanding constant pipe temperatures of minus 50° c(-58° f) to a maximum of 200° c (392° f).

Fast and Efficient installation

 Wraps around existing or difficult to access pipes

Snaps together in seconds

The built-in crimp means no loose clips or rivets

Grips tight and stays tight

Made from DEKS quality polymer compound

Aluminum base conforms to roof with ease

Twenty-year warranty

Product Brochure

All in one exhaust fan vent 

Ideal for interior exhaust fans

Equipped with a 3" or 4" Flex hose

This vent is intended for bathroom and attic venting

Packed ready for installation

Comes with DEKS Roof Boot Flashing attached

Extended Edge to prevent flex hose from slipping off

Zip tie included to attach the flex duct

Special order

Sizes:
#3: 1/4″ – 5″
Outside Base Diameter: 7 3/4″

Colors:
Green, Brown, White, Red, Gray

Ethylene propylene diene monomer (EPDM) capable of withstanding constant pipe temperatures of minus 50° c
(-58° f) to a maximum of 115° c (239° f).